Part P building Regulations

According to Government statistics, each year on average 10 people die and about 750 are seriously injured in accidents involving unsafe electrical installations in the home. To help address this issue, the Construction Industry Deregulation Task Force recommended in 1995 that electrical safety requirements should be included in the Building Regulations.

Part P of the building regulations is intended to increase the safety of households by improving the design, installation, inspection and testing of electrical installations in dwellings when these installations are being newly built, extended or altered.

Part P will redefine building work to include electrical work on certain types of fixed electrical installation in dwellings. The new requirement in the Building Regulations, ‘Requirement P', is simply that: Design, Installation, Inspection and Testing
Reasonable provision shall be made in the design, installation, inspection and testing of electrical installations in order to protect persons from fire or injury.

Part P applies only to fixed electrical installations that are intended to operate at low voltage (normal 240V mains supply) or extra-low voltage which are not controlled by the Electricity Supply Regulations 1988 as amended, or the Electricity at Work Regulations 1989 as amended.

Enforcement
Failure to comply with the requirement will be a criminal offence. Local authorities will also have the power to require the removal or alteration of work that does not comply with the Building Regulations.

Intended work that is subject to the provisions of Part P will have to be notified to the local authority. Traditionally, work notifiable under the Building Regulations is subject to inspection by the local authority's building control department (or other approved building inspector). However, to avoid the need for local authorities to appoint specialist agents for this purpose, it appears likely that building control bodies would be authorized to accept certificates of compliance (ie Electrical Installation Certificates) issued by ‘Competent Firms'.

Under such Competent Firms provisions, appropriately approved electrical contractors are able to self-certify that their work meets the requirements of the Building Regulations. In this case there will be a need to supply the relevant building control body (as well as the person ordering the work) with an Electrical Installation Certificate signed by a competent person. The alternative would be to pay a fee to have the work inspected by a local authority building control department, or other approved private sector building inspector.

For the purposes of Part P, the Government has defined ‘Competent Firms' as those registered under the NICEIC Approved Contractor scheme, the Domestic Installer Scheme and the Electrotechnical Assessment.